Tension Electric Fence
If you need customized products, Contact US !
Category
Tag list
- 产品描述
-
System Introduction
Tension electronic fence is an intelligent fence device that prevents human body from climbing, pulling, pressing, cutting and invading.
The tension electronic fence adopts a new detection method and special signal processing method to ensure that changes in the environment will not cause changes in the static tension value, tension alarm value, and tension alarm threshold, completely changing the shortcomings of poor environmental adaptability and easy false alarms of previous perimeter security detectors. Therefore, the tension electronic fence can remain loyal to its duty and work stably and reliably all day long in harsh environments such as wind, frost, rain, snow, thick fog, sand and dust, high temperature, and low temperature.
When there is an illegal crossing of the wall (or fence), the alarm management center can immediately receive an alarm message and issue sound and light alarms. At the same time, relevant equipment (such as sound and light alarms, cameras, etc.) can be linked on site.
Alarm method
Intrusion alarm: When the tension wire is tightened by external force, and the tension change and duration reach or exceed the specified requirements, an alarm signal is issued.
Relaxation alarm: When the steel cable relaxes under external force and the tension change reaches or exceeds the specified requirements, an alarm signal is issued.
Wire breakage alarm: When the tension wire is cut, an alarm signal is issued.
Anti disassembly alarm: When the control rod casing is disassembled or the control host is disassembled, an alarm signal is issued.
Power loss alarm: When the power supply is cut off, it automatically switches to the backup power supply and sends out an alarm signal.
Fault alarm: It has self checking and self diagnostic capabilities, and has equipment fault alarm function.
System Advantages
• The tension wire does not carry voltage, which is different from the pulse fence, making it more reassuring to use.
• The alarm value and relaxation value are adjustable, and the alarm sensitivity can be customized for the project.
• Capable of 485 communication and network communication.
• It can form a multi-level management system with intelligent control hosts and management platform software.
• The control rod body is made of aluminum material with anti-oxidation treatment, and all accessory screws are made of SUS304 stainless steel material. The shell protection level is IP55.Product Parameters
S7W tension control host
Communication Method RS485 Bus, LAN (Network) Screen Size 3.0 inch Alarm Types Intrusion, Slack, Broken Wire, Tamper, Power Loss, Fault Alarm, etc. Power Supply DC18V-24V Backup Power Supply DC12V Device Power ≤15W Alarm Input Passive Normally Closed / Normally Open Switch Signal Input Alarm Output Port Passive Normally Closed / Normally Open Relay Output, DC12V Siren Output Alarm Duration 1~999 Seconds Adjustable Device Dimensions 345 × 242 × 100 mm X800/X900 tension control rod
Product Specification Single/Dual Defense, 4/6 Wires Alarm Output Output Normally Open/Normally Closed Switch Signal Alarm Types Intrusion, Slack, Broken Wire, Tamper Device Dimensions 4-wire: 800×70×50mm 6-wire: 1200×70×50mm Power Supply DC12V Device Power ≤5W Operating Environment Temperature: -40℃～+50℃ Relative Humidity: <95% Tension Threshold 100-450N Tightening Alarm Displacement Within 75mm Alarm Duration 30~180 seconds Alarm Sensitivity Two-level adjustable sensitivity Tension Module Load Capacity Above 1000N Alarm Delay <3 seconds S9 series integrated tension control rod (with display screen)
The S9 series control rod is a newly developed integrated tension control rod by our company, which comes with 485 communication and RJ45 network ports. It can directly communicate with our keyboard host without the need for an external address module; Integrated design, with a 2.0-inch display screen and debugging buttons inside the control lever, allowing for intuitive viewing of equipment tension values, setting tension alarm thresholds, and other parameter settings.
Product Specification Single/Dual Defense, 4/6 Wires Alarm Output Passive Normally Closed/Normally Open Switch, DC12V Siren Output Alarm Input Passive Normally Closed/Normally Open Switch Signal Alarm Types Intrusion, Slack, Broken Wire, Tamper, Power Loss Communication Method RJ45 Network, RS485 Bus Screen Size 2.0 inch Device Dimensions 800×70×50mm / 1200×70×50mm Power Supply DC18V-24V Device Power ≤5W Operating Environment Temperature: -40°C～+50°C, Relative Humidity: <95% Tension Threshold 100-450N Tightening Alarm Displacement Within 75mm Alarm Duration 10~999 Seconds Adjustable Tension Module Load Capacity Above 1000N Alarm Delay <3 seconds Alarm Sensitivity Adjustable according to on-site environment
Tension Electric Fence
If you need customized products, Contact US !
Share to
Category
Tag list
Request a Quote
We will contact you within one working day. Please pay attention to your email.
Related Products
Main products
Focus on the research and development of various related products of metal wires and mesh.
Give us an email to surprise you
Contact Us