Expanded Mesh

SWD (Short Way Dimension)：The length of short diamond diagonal from one pitch point center to another pitch point center.

Email:

admin@jinjuewiremesh.com

Telphone/WhatsApp:

+86-15831806566

Inquire Now

Product Parameters

Material Grade
Carbon steel, stainless steel, aluminum alloy, and other metal alloy plate

SWD (Short Way Dimension)
The length of short diamond diagonal from one pitch point center to another pitch point center.

LWD (Long Way Dimension)
The length of long diamond diagonal from one pitch point center to another pitch point center.

SWO (Short Way Opening)
The length of the short diagonal of the hole.

LWO (Long Way Opening)
The length of the long diagonal of the hole.

Bond
The intersection of two strands and it is always the width of two strands. Sometimes referred to as Knuckle.

Overall Thickness
Actual measurement of the thickness of the mesh measured at the bond.

Strands
Individual slit metal strips, or sides of an expanded metal pattern.

Strand Width
Amount and dimensional length fed between the upper and lower tooling to produce the mesh.

Strand thickness
Gauge or thickness of the sheet or coil from which the expanded metal was produced. It is also the thickness of the material after fattening.

LW
Long way of expanded metal sheet

SW
Short way of expanded metal sheet

Raised Style Expanded Metal Mesh Standard Specification List

Item Code	Minimum Thickness (inch)	Weight	Design Size		Opening Size		Strand		Overall Thickness	Percent Open Area
Item Code	Minimum Thickness (inch)	(lbs/SF)	SWD (Inch)	LWD (Inch)	SWO (Inch)	LWO (Inch)	Width (Inch)	Thickness (Inch)	Overall Thickness	Percent Open Area
1/2"#18R	0.044	69	0.500	1.2	0.437	0.937	0.087	0.048	0.164	65%
1/2"#16R	0.055	87	0.500	1.2	0.437	0.937	0.087	0.060	0.164	65%
1/2"#13R	0.085	148	0.500	1.2	0.325	0.875	0.119	0.090	0.225	60%
3/4"#18R	0.044	46	0.923	2.0	0.812	1.750	0.106	0.048	0.202	77%
3/4"#16R	0.055	57	0.923	2.0	0.812	1.750	0.106	0.060	0.202	77%
3/4"#13R	0.085	87	0.923	2.0	0.750	1.687	0.107	0.090	0.202	77%
3/4"#9R	0.128	194	0.923	2.0	0.69	1.58	0.16	0.135	0.300	65%
1-1/2"#16R	0.055	43	1.330	3.0	1.250	2.750	0.115	0.060	0.222	83%
1-1/2"#13R	0.085	65	1.330	3.0	1.250	2.750	0.115	0.090	0.222	83%
1-1/2"#9R	0.128	130	1.330	3.0	1.125	2.500	0.155	0.135	0.280	77%

Flattened Style Expanded Metal Mesh Standard Specification List

Item Code	Minimum Thickness (inch)	Weight	Design Size				Strand		Overall Thickness	Percent Open Area
Item Code	Minimum Thickness (inch)	(lbs/SF)	SWD (Inch)	LWD (Inch)	SWO (Inch)	LWO (Inch)	Width (Inch)	Thickness (Inch)	Overall Thickness	Percent Open Area
1/2"#18F	0.037	66	0.500	1.26	0.312	1.000	0.098	0.041	0.041	61%
1/2"#16F	0.047	84	0.500	1.26	0.312	1.000	0.099	0.051	0.051	60%
1/2"#13F	0.072	168	0.500	1.26	0.240	0.915	0.132	0.076	0.076	47%
3/4"#18F	0.037	43	0.923	2.10	0.750	1.812	0.118	0.041	0.041	74%
3/4"#16F	0.047	54	0.923	2.10	0.750	1.812	0.118	0.051	0.051	74%
3/4"#13F	0.072	83	0.923	2.10	0.625	1.750	0.120	0.076	0.076	74%
3/4"#9F	0.108	170	0.923	2.10	0.562	1.687	0.165	0.114	0.114	64%
1-1/2"#16F	0.047	41	1.330	3.15	1.062	2.750	0.128	0.051	0.051	81%
1-1/2"#13F	0.072	62	1.330	3.15	1.000	2.625	0.130	0.076	0.076	80%
1-1/2"#9F	0.108	132	1.330	3.15	0.037	2.625	0.165	0.114	0.114	72%

Advantages of Expanded Metal

• Cost efficiency

• Greater strength

• Anti-skid qualities

• Lightness

• Ideal for secondary operations

• Wide usage

Application of Expanded Metal Mesh

The expanded metal mesh is ideal material for many fields, wildly used for filters, Walkways for footbridge, anti-slip stair steps , safety fences, reinforcing of concrete, as metallic lath to support plaster or stucco, shielding in buildings and constructions, facade;ade, Ceiling, Curtain wall, Cladding, Interior decoration, Security guard, Window protection, Sunshade, Balustrade & railing, Privacy separation.